Відео

Wtf...that looks horrible.☹️

Mine smells strong when you hear the condenser kick on

The instrument cluster is not needed to be screwed off, just pull the whole plastic , its quick connect.

That part of my ac doesn't come off. I can only slide the filter out from a crevice on the side. Ugh. Can't get to the part I need to spray

Thank You for this tip I'm dealing with this as we speak

THANX THIS IS SO HELPFUL FOR MY DAUGHTER

You are the man. Thanks!

I didn't know those vents could be pried off! I don't want to break them.

Thanks man super helpful!

If anyone is wondering how this works....it actually did! I did exactly what he said to do. Washed the black from the parts and cleaned the filter. Sprayed the inside all down with Lysol and let it sit overnight. Put it back together, turned it back on.... and absolutely ZERO smell! We were having a horrible sour milk type smell coming from our ACs. It is now COMPLETELY gone! Thanks Biker Mike!!

Well explained video. This looks easier than changing the engine oil filter. Gonna give this a go

From Lysol website: "Lysol does not recommend using Lysol Disinfectant spray on brass, copper or aluminum or painted wood surfaces." Please do not use corrosive products when cleaning the AC evaporator.

Hi, The module need programming.

Saved me today thanks

hey what was the code number

Thank you so much for this! I have a unit that can't be easily removed so i do not have the option to remove all sorts of parts...in the back especially! Definitely going to give this a try and see if it gets out that Sour Milk smell! And if I may ask....where are you originally from, Biker Mike? I keep thinking that i detect a bit of an accent mixed in while you are speaking! Thanks again!

Thank you!

Leaking oils is what GM does best. 😂

I'll give this a try. I've dealt with this issue quite a bit over the past few years; within a couple months of use, without fail, the smell just becomes unbearable. It's a very recognizable smell, a disgusting, sour smell; like a combination of stinky feet, cigarette butts and old cat piss-- it's mold & mildew. Disgusting. The only solution I've found is to take the whole unit outside, disassemble it, hose down and clean out the entire thing and spray it with bleach, dry it out and re-assemble it again. After that, it smells clean and fresh-- but man is that such an annoying and time-consuming thing to do, especially because I run 4 a/c units in my house. It really baffles me how many millions of these things they sell and there's so little information out there on how to keep this problem from happening, or why that haven't engineered a better way to do this.

What are you talking aboot?

Also do u wipe the lysol off after saturating ? I think thats what u said in the vid .or do u let sit overnight and no wipe down .let it run the next day ? No spray it down with water or anything the next day ? Just leave the lysol on there ? Just making sure .thanks

This is by far the worst vid ive been subjected to by far !

You must get paid for the time you take !

Thankyou 😎

Thinking “a boot” it. You can’t hide your Canadian for very long

Thanks a lot your video really helped!

Awesome 🎉🎉🎉🎉🎉 I'm trying this today!!!

Are you fucking kidding me? THIS is why GM is such crap. They think they’re smart by having all of these digital controls behind the scenes, but in reality, all of this could have been avoided BY JUST MEASURING THE RESISTANCE OF A NORMAL POTENTIOMETER! You know, the way EVERYONE ELSE DOES IT. Why on EARTH does a manual switch have to be “calibrated”? It should have a god damn min-max and float between them… Anyways, thanks for the info, I’m done ranting so now I can go try this…

You just saved us all a bunch of Money Sir, just have to go out and get it. they are pretty expensive from factory,,.,Amazing Video

Tried taking unit O had apart and cleaned with liquid mildew remover and coil cleaner. Also, I cleaned out the drain pan. Still had a lingering smell but not as bad. Will try this. Don't want to have to throw a good running unit away. Thanks for the suggestion.

Oh and have you installed the new limiter/controller with presets yet?

Thank you for posting this it is exactly what I want to do!! So I am guessing that you used the voltage reducer/converter for your set up? Or are both of those exactly the same? And would you post where you purchased the switch and the fuse? Thanks again for posting this and the video was great!

Would a crow's foot not have fit?

Any tips how to remove that plug. Looks like the same plug that’s on my 2021

thanks for a great DIY video. Please send the amazon link for the throttle cable and where did you get the servo mount bracket ? Thanks for all your help

What do you use to clean your bike

I just got an 05 Sierra and this is what I’m going to do. Thank you!

The idiot designers at Deere could have easily put those spindle grease fittings a half-inch higher so the grease gun nozzle would go straight on. That would have made lubing the spindles MUCH easier. As is is, I just forget it.

I'm oowt

Skip to about 2 minutes in to start

What caused a snowmobile engine to seize ? WELL : Try to go flatt out in your car like what you do with the sled ! you will have the same resolute ish 🤕🤣🤣🤣🤣

Nice review sir, thank you.....NJ

Great job. We all dream of a crate bike left over fro 1984 in Japan shipped to our front door, nice cr500..😎👍

Great video!! But I removed the fuse and it did not silence the beeping. You mentioned when you removed your fuse the beeping silenced? Just wondering if you have any tips.

How do you know if its the switch that needs to be replaced or the module

🤣 these Canadians! Wtf. Spend 40 on an updated after market valve cover delivered the next day. He didn’t spend any money. Becides 20$ in brake cleaner and wasted 3 hours of cleaning. Now he made new holes and messed up his air flow in there. 🤦‍♂️

Would this also lead to oil in the muffler or do you think I have something else in my hands ?

How did you deal with overtravel from the servo? I'm doing this now and I have 180 degree travel on the servo but only need about 100 degrees for WOT. I'm afraid of applying to much pressure after the WOT position has been reached but still have travel / adjustment on the servo. Be nice if you could limit the output of the tester. Or is this not a problem? Also, I'm trying a smaller servo, 12kg. Not sure if it's going to work but measuring the torque on the throttle arm was around 7-8 kg. Certainly gave me some ideas, thanks for posting.

I’m gonna do this today. Struggling with a Crf50 pilot and it’s solid. I’ll let you know. Thanks for the video.

My truck batteries were low…it almost didn’t start. I plugged in my phone and it wasn’t charging. I turned the truck off and did what you said then restarted the truck and the usb port is working now. This is on a 2017 Silverado L5P Thanks for the info!